About Maintenance

Although UV ozone cleaning and reforming equipment requires relatively little maintenance other than lamp replacement, we offer the following services to customers who have installed our equipment based on the following ideas.

Maintenance performed and contents

Mechanical Hardware Aspects

Appearance inspection: No scratches, dents, distortion, etc. (Irradiator, power supply box, exhaust system)	Enclosure part Door hinge Magnet catch Roller catch Door peripheral packings Sample stage and sample stage shelf tier Intake air pre-filter
Dimensional inspection	Within the dimensional tolerances of the drawings (check for deterioration over time)
Mechanism inspection	Each part is properly installed

Electrical hardware surface

Insulation resistance	DC1000V　Over 10MΩ
Lamp Voltage	rated value±15%
Lamp current	rated value±15%
Open voltage	Ballast No Load　rated value±15%
Operation check	lamp ON-OFF blowerON-OFF Operation as per timer instructions Operation panel pilot lamp lightsON-OFF Lamp limit switch operation
Retightening of terminals, etc.	Lamp terminal Irradiator and power supply box connection terminal Connections in power supply box

Functional aspects and others

For those who use our facilities, we recommend periodic maintenance (2-3 years in the case of such equipment) after checking the time of installation or the totalized hour meter on the facility side.