About Introduction Flow

All prices are open to the public. Please feel free to contact our Sales Engineering Department.

Please check the connection example for ASM1101N.

ASM2003N requires a cooling air supply to cool the lamp and stabilize the UV irradiance. The required air volume is 10 L/min or more and the required pressure is 0.4 MPa. The ASM2003N is equipped with a filter-regulator (filtering degree 5μm), but the air to be supplied should be air from which oil and moisture have been removed.

We are happy to respond.

We have a small loaner unit that is easy to utilize. We also have a lineup of low-cost experimental machines.

1. Purpose of Introduction
2. Workpiece material and dimensions
3. Workpiece Shape
4. cycle time
5. Heat load and other restrictions
6. Installation space
7. Input voltage and frequency
8. Availability of ozone discharge ducts, etc.

Safety mechanisms are standard built into the laboratory equipment. However, UV and ozone are harmful to the human body. When using the equipment, please use it in an environment where you will not be forced to look directly at the UV light or be exposed to it. Also, if you smell ozone, you should take measures such as ventilating the room.

Ultraviolet rays are harmful to the human body, causing damage especially to the eyes and skin.The degree of danger depends on the wavelength, with the most harmful wavelength being 270 nm.The main wavelength of low-pressure mercury vapor lamps used in ordinary UV cleaning and surface modification equipment is the highly hazardous 254 nm, and this 254 nm is generally targeted when controlling light leakage.The allowable exposure according to the recommendation of ACGIH (American Conference of Governmental Industrial Hygienists) in the United States is called TLV (Threshold Limit Value), which is 6.0 mJ/cm₂ at a wavelength of 254 nm.

We can immediately respond to custom designs and quotations according to customer needs and applications.

The frequency of use and the environment in which the product is used will greatly affect the quality of the product. As long as the environment in which they are used is stable, they will not be damaged. There are no particular signs of breakage, and the product should be used until it breaks. For daily inspections, please check for abnormal noise and dust accumulation once every 1 to 3 months.

We also provide a full range of technical follow-up services by our professional staff. Please do not hesitate to contact us.

The system is environmentally friendly as well as labor-friendly, as it generates less CO₂, etc.

Since the product does not fall under the category of strategic substances, it is possible to introduce the product overseas. If you need a Certificate of Non-Applicability, please feel free to contact our Sales Engineering Department.

Since our UV irradiation equipment uses the same lamps for both laboratory and production equipment, there is little risk of scale-up, and irradiation conditions can be utilized as they are when deployed in mass production equipment.

Yes, we can accommodate you. Please feel free to contact us.

Mercury lamps contain a very small amount of mercury, but are currently exempted from the RoHS Directive. However, it is necessary to periodically check the trend of mercury in these lamps.

Used UV lamps are treated as industrial waste. As the generator, you are requested to ask an industrial waste handling company or send them to us.

Please feel free to contact our Sales Engineering Department. We will be happy to assist you.

Basically, it is possible to respond.

The warranty is for one year. After that, please contact us for repairs, maintenance and inspections.